Análisis y diseño estructural de la cobertura liviana para la calidad educativa de la I.E.P. Bandera del Perú en la provincia de Pisco, departamento de Ica - 2024

Resumen

En el presente trabajo de investigación se plantea realizar la evaluación del análisis estático, dinámico y diseño estructural del proyecto: “Cobertura Liviana para la Calidad Educativa de la I.E.P. Bandera del Perú en la Provincia de Pisco, Departamento de Ica”, el cual contemplará la aplicación del Reglamento Nacional de Edificaciones con las siguientes normas RNE 0.20, RNE 0.30, RNE 0.50, RNE 0.60, RNE 0.90, y a su vez la aplicación de la Norma ACI 318-19 Concreto estructural. En esa medida, se ha identificado el problema que significa carecer de una cobertura liviana que sirva para la protección solar de los estudiantes banderinos, el cual influye directamente sobre su rendimiento académico, por ende, la necesidad de realizar este proyecto de investigación para cubrir la necesidad estudiantil que existe hoy en día en la Provincia de Pisco. Se busca, asimismo, que el Software SAP2000, herramienta utilizada para el análisis y diseño estructural de modelos estructurales, chequee y diseñe las dimensiones de las columnas, vigas de concreto armado, su comportamiento con la cubierta metálica de acero galvanizado y a su vez el comportamiento y diseño de las zapatas con vigas de cimentación. El conocer y utilizar las herramientas que ofrece SAP2000, para el cálculo y diseño estructural, nos da opción de conocer los desplazamientos, fuerzas cortantes y momentos flectores de los elementos que se modelan en el software, dándonos la opción de modificar las dimensiones y propiedades de los elementos, los parámetros sísmicos, y los parámetros que nos establece la normativa RNE para el cálculo del espectro del diseño sísmico, casos y combinaciones de carga, parámetros de irregularidades en planta, entre otros, dándonos así la oportunidad de aplicar criterios de seguridad y en lo posible ser conservadores para el análisis y diseño estructural de la cobertura liviana.
In this research work, it is proposed to carry out the evaluation of the static, dynamic analysis and structural design of the project: “Light Coverage for the Educational Quality of the I.E.P. Flag of Peru in the Province of Pisco, Department of Ica", which will contemplate the application of the National Building Regulations with the following standards RNE 0.20, RNE 0.30, RNE 0.50, RNE 0.60, RNE 0.90, and in turn the application of the ACI Standard 318-19 Structural concrete. To this extent, the problem of lacking light coverage that serves as sun protection for Banderinos students has been identified, which directly influences their academic performance, therefore, the need to carry out this research project to cover the student need that exists today in the Province of Pisco. It is also intended that the SAP2000 Software, a tool used for the structural analysis and design of structural models, checks and designs the dimensions of the columns, reinforced concrete beams, their behavior with the galvanized steel metal cover and, in turn, the behavior and design of the footings with foundation beams. Knowing and using the tools offered by SAP2000, for structural calculation and design, gives us the option of knowing the displacements, shear forces and bending moments of the elements that are modeled in the software, giving us the option of modifying the dimensions and properties of the elements, the seismic parameters, and the parameters established by the RNE regulations for the calculation of the spectrum of the seismic design, load cases and combinations, parameters of irregularities in the plan, among others, thus giving us the opportunity to apply safety criteria and as much as possible, be conservative for the analysis and structural design of the light cover.

Descripción

Palabras clave

Diseño estructural, Cobertura liviana

Citación

Colecciones